CONTACT

Email: sales@sca-australia.com.au
Address : 1/121 Olympic Circuit, Southport 4215, QLD, Australia
Phone : +61 7 5571 1986
Fax : +61 7 5528 6487

Test Kits

Oil Analysis Test (Part # RT752C)

Using the Checkmate device, a drop of oil can be milked off the suction side of a system. The Oil will be seen wetting through the Detector Tubes' Transfer Agent. As the Oil passes through the Transfer Agent a dye fraction will release and stain the Indicator Segment. The color captured by in the Indicator is compared against a color chart

The soft colors indicate low Oil conductivity progressing stepwise to the
stronger colors of highly conductive Oil . Hence, the full range of Oil
contaminants are determined by dielectric strength

Refrigerant Gas Analysis

Part # RT750A - Virgin Acid Tube

The Acid and Moisture level of refrigerant gas are measured independently.
Knowing the purity of Refrigerant is vital information for every service technician. The technician needs to know if the refrigerant can be:

    1. immediately reused,
    2. needs to be cleaned-up,
    3. contaminated beyond reclaiming capabilities,
    4. or failed to be properly cleaned during a reclaiming process.

Part # RT750A - Acid Detector Tubes

This is a positive test for Acidic Refrigerant. Color change is Blue to Yellow, or Blue to White, often a mixture of both yellow/white.

Part # RT751M - Virgin Moisture Tube

Part # RT751M - Moisture Detector Tube

For Moisture, the initial Light Brown indicating layer, stains to a Grape or Blueberry.

The Detector Tubes results for Refrigerant testing are displayed in parts per million (ppm)

In System Diagnostics, the tests result obtained by the Oil Detector Tube can be
correlated to the findings of the Refrigerant examination, or visa versa

"Give us the tools and we will finish the job"
...Sir Winston Churchill (1874-1965)

 

 


Part # RT700K
Checkmate Contamination Detector Kit

Part # RT750A
Checkmate Acid Detector Tubes for Measuring Acid in Refrigerant Gas

Part # RT751M
Checkmate Moisture Detector Tubes for Measuring Moisture in Refrigerant Gas

Part # RT752C
Checkmate Method for Determining Contaminants in Compressor Lubricant

The Checkmate method is the Industries only valid field test for a quick and accurate determination of contaminant levels in Oil and Refrigerant.

An amazing new compound for sealing refrigeration gaskets and threads

Nylog will never harden or dry and always remains temperature and vibration resilient

Gaskets treated with Nylog will not crack, dry or become heat fixed to metal

 

 

© 2004 SCA AUSTRALIA, PTY LTD. All rights reserved.

This web site was made and is maintained by N@F and Newtons